Powerhouse 1/2HP Ice Eater- P500-25-115V

Ice Eater P500 - 1/2 HP propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice. 3-year limited warranty!
Features: Ice Eater P500, unlike other de-icing units, requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines.  It can be taken out of the box, hung in place and plugged in.  Ice Eater may be hung from a pier or boat.  Two to three feet is the average operating depth.

• 1/2 H.P. energy efficient high quality motor with 28 pounds thrust
  
• 5.0 amps, 115 volt, one phase, 60/50 cycle
  
• 25 foot quick change power cord
  
• Two 25 foot x 3/8 hollow braided mooring lines with shackles
  
• Dimensions of shipping box 12 5/8 x 12 5/8 x 12 3/4
  
• Weight 36 pounds
  
• Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
  
• Motor shaft is 316 stainless steel, the best material for salt water application
  
• Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor. Motor and capacitor are matched for ultimate performance
  
• Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid. Additional double lip shaft seal for extra protection
  
• Stator motor windings have double impregnation of baked insulating varnish
  
• Two heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
  
• Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
  
• Propeller is custom designed for maximum thrust and performance; Propeller screws on shaft for easy removal and replacement
  
• Twenty-five feet of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
  
• Heavy duty PVC custom brackets that attach motor to shroud. All stainless bolts and locking aircraft nuts are used.
  
• Performance certified tested at our facility for proper output and leaks before shipment
  
• Best three year limited warranty in the marketplace
  
• Comes complete, just open the box, remove and install
  
• Optional thermostat custom design turns Ice Eater on when needed; Ideal for unattended application  Sold Separately, click here
  

- P500-25-115V